Setting Up Your PIN on the Mobile Device
1. Tap on Settings > Security on the mobile device.
2. Tap on Screen lock and then select an authentication type (PIN is recommended).
3. Enter the PIN: 0000 and tap Confirm. If prompted to secure start-up, tap Yes.
4. Enter a new 4-digit PIN and tap Next. Re-enter your new PIN, tap Confirm.
The PIN can be as long as you want, it just needs to be at least 4-digits.
For
detailed instructions with images and to download the Package Valet User’s
Guide, see Package Valet > User Guides in the Knowledge Base.Related Articles
Starting Up the Mobile Device
If your site purchased a Mobile Device from Position Imaging, follow these instructions to start it up. 1. Remove the mobile device (phone) and charger from the package and set up on desk. 2. Plug in the charger and place the mobile device in it. 3. ...Package Valet Getting Started Guide-BMX
Click below to download the Package Valet Getting Started Guide for BMX.Package Valet User's Guide
Click below to download the Package Valet User's Guide (using a PI-loaned device).Connecting to Your WiFi
You will need to connect the Mobile Device to the site’s Wi-Fi. Tap on Settings > Connections on the mobile device. Tap Wi-Fi. Then make sure Use Wi-Fi is On. Wait for your network to appear. Tap your network. Select your network and enter the Wi-Fi ...Tips for Capturing a Label
Use the following tips when capturing a label: The whole label should be in view The address/name is visible The barcode is in view The label is flat (not bent) The image should not be blurry. Try to hold the mobile device steady and make sure that ...