Scanning and Placing a Package Using the Kiosk

Scanning and Placing a Package Using the Kiosk

  1. After you scan your KeyCard/KeyFob, scan the first package.
    1. Make sure the entire label is visible and the package is not moving.
    2. Hold the package so that the tracking UPC lines are level in front of the scanner camera.
    3. If you are experiencing trouble scanning a package, try to zoom in on one bar code.
    4. The camera will read the barcode and attempt to read the name and address of the resident to automatically assign them.
    5. If the recipient’s name does not appear or if there is no label to scan, manually search for the resident.
  2. Touch to select the recipient, if it isn’t already selected from the list. 
    1. The door unlocks.
  3. Touch the type of package: Standard, Envelope or Flat, Oversized, etc.
    1. The system default for all packages is Standard.
    2. A popup indicates where to place the package in the room: Standard (shelf) area, Flat area, Oversized area, etc.
  4. Enter the room and place the package on any shelf in the room or in the designated area (Oversized or Flat).
    1. If placing in a designated area (Oversized or Envelope/Flat), touch Confirm Delivery on the screen.
  5. Touch Next Package to deliver additional packages or exit the room and close the door if finished delivering.
Info
Download the SPR User's Guide for detailed instructions with images. See the Reference Documents in the Knowledge Base.